ITM Mertric Fine Thread HSS Hand Tap M6 - M20 (Set of 2 Pcs)
Price Range: ₹739 to ₹4,273
Coating: Bright
Size (mm): M6 - M20
Type: HSS Hand Taps
Pack Quantity: Set of 2 Pcs (Taper, Bottom)
Thread: Mertric Fine Thread
Models in the ITM Mertric Fine Thread HSS Hand Tap M6 - M20 (Set of 2 Pcs) range
| SKU | Diameter (mm) | Thread | Material | Price | Add to cart |
|---|---|---|---|---|---|
| CU.TA.HA.00686 | 20 mm | Metric | High Speed Steel | Was ₹6,244₹3,622 inclusive of GST Save 42% | |
| CU.TA.HA.00685 | 20 mm | Metric | High Speed Steel | Was ₹7,367₹4,273 inclusive of GST Save 42% | |
| CU.TA.HA.00684 | 18 mm | Metric | High Speed Steel | Was ₹5,002₹2,901 inclusive of GST Save 42% | |
| CU.TA.HA.00683 | 18 mm | Metric | High Speed Steel | Was ₹5,002₹2,901 inclusive of GST Save 42% | |
| CU.TA.HA.00682 | 16 mm | Metric | High Speed Steel | Was ₹2,758₹1,600 inclusive of GST Save 42% | |
| CU.TA.HA.00681 | 14 mm | Metric | High Speed Steel | Was ₹2,758₹1,600 inclusive of GST Save 42% | |
| CU.TA.HA.00680 | 14 mm | Metric | High Speed Steel | Was ₹2,858₹1,658 inclusive of GST Save 42% | |
| CU.TA.HA.00679 | 12 mm | Metric | High Speed Steel | Was ₹2,236₹1,297 inclusive of GST Save 42% | |
| CU.TA.HA.00678 | 12 mm | Metric | High Speed Steel | Was ₹2,236₹1,297 inclusive of GST Save 42% | |
| CU.TA.HA.00470 | 6.00 mm | Metric | High Speed Steel | Was ₹1,274₹739 inclusive of GST Save 42% | |
| CU.TA.HA.00471 | 7.00 mm | Metric | High Speed Steel | Was ₹1,334₹774 inclusive of GST Save 42% | |
| CU.TA.HA.00473 | 8.00 mm | Metric | High Speed Steel | Was ₹1,334₹774 inclusive of GST Save 42% | |
| CU.TA.HA.00474 | 10 mm | Metric | High Speed Steel | Was ₹1,538₹892 inclusive of GST Save 42% | |
| CU.TA.HA.00475 | 10 mm | Metric | High Speed Steel | Was ₹1,538₹892 inclusive of GST Save 42% | |
| CU.TA.HA.00472 | 8.00 mm | Metric | High Speed Steel | Was ₹1,100₹638 inclusive of GST Save 42% | Out of Stock |
ITM Mertric Fine Thread HSS Hand Tap M6 - M20 (Set of 2 Pcs)
Hand Tap are straight flute general purpose taps which can be used for both machine or hand tapping. They are generally the most economical tool for use on production runs, but are best on materials that produce chips, or where the swarf breaks readily. Where deep holes are to be tapped, in materials which produce stringy swarf, other types of taps may be needed, especially for coarse threads.