ITM UNF Thread HSS Hand Tap 1/4" - 1-1/2"
Price Range: ₹745 to ₹16,721
Size (Inches): 1/4" - 1-1/2"
Coating: Bright
Type: HSS Hand Taps
Thread: UNF
Pack Quantity: Set of 3 Pcs (Taper, Second & Bottom)
Standard: BS 949 OF 1979
Models in the ITM UNF Thread HSS Hand Tap 1/4" - 1-1/2" range
| SKU | Diameter (inches) | Thread | Material | Price | Add to cart |
|---|---|---|---|---|---|
| CU.TA.HA.00436 | 1/4 Inch | UNF | High Speed Steel | Was ₹1,284₹745 inclusive of GST Save 42% | |
| CU.TA.HA.00437 | 5/16 inch | UNF | High Speed Steel | Was ₹1,452₹842 inclusive of GST Save 42% | |
| CU.TA.HA.00438 | 3/8 Inch | UNF | High Speed Steel | Was ₹1,767₹1,025 inclusive of GST Save 42% | |
| CU.TA.HA.00439 | 7/16 inch | UNF | High Speed Steel | Was ₹2,259₹1,310 inclusive of GST Save 42% | |
| CU.TA.HA.00440 | 1/2 Inch | UNF | High Speed Steel | Was ₹2,859₹1,658 inclusive of GST Save 42% | |
| CU.TA.HA.00441 | 9/16 inch | UNF | High Speed Steel | Was ₹4,137₹2,399 inclusive of GST Save 42% | |
| CU.TA.HA.00442 | 5/8 inch | UNF | High Speed Steel | Was ₹4,137₹2,399 inclusive of GST Save 42% | |
| CU.TA.HA.00443 | 3/4 Inch | UNF | High Speed Steel | Was ₹6,559₹3,804 inclusive of GST Save 42% | |
| CU.TA.HA.00444 | 7/8 inch | UNF | High Speed Steel | Was ₹9,033₹5,239 inclusive of GST Save 42% | |
| CU.TA.HA.00445 | 1 inch | UNF | High Speed Steel | Was ₹11,424₹6,626 inclusive of GST Save 42% | |
| CU.TA.HA.00446 | 1-1/8 inch | UNF | High Speed Steel | Was ₹15,468₹8,971 inclusive of GST Save 42% | |
| CU.TA.HA.00447 | 1-1/4 inch | UNF | High Speed Steel | Was ₹18,594₹10,785 inclusive of GST Save 42% | |
| CU.TA.HA.00448 | 1-3/8 inch | UNF | High Speed Steel | Was ₹24,015₹13,929 inclusive of GST Save 42% | |
| CU.TA.HA.00449 | 1-1/2 inch | UNF | High Speed Steel | Was ₹28,830₹16,721 inclusive of GST Save 42% |
ITM UNF Thread HSS Hand Tap 1/4" - 1-1/2"
Hand Tap are straight flute general purpose taps which can be used for both machine or hand tapping. They are generally the most economical tool for use on production runs, but are best on materials that produce chips, or where the swarf breaks readily. Where deep holes are to be tapped, in materials which produce stringy swarf, other types of taps may be needed, especially for coarse threads.