Miranda Standard Thread HSS Hand Tap M12 - M52
Price Range: ₹1,942 to ₹18,810
Coating: Bright
Size (mm): M12 - M52
Type: HSS Hand Taps
Pack Quantity: Set of 3 Pcs (Taper, Second & Bottom)
Thread: Mertric Coarse
Standard: ISO 529, IS 6175, BS 949, DIN, ANSI, JIS
Models in the Miranda Standard Thread HSS Hand Tap M12 - M52 range
| SKU | Model No. | Diameter (mm) | Thread | Material | Price | Add to cart |
|---|---|---|---|---|---|---|
| CU.TA.HA.00354 | 121753A | 12 mm | Metric | High Speed Steel | Was ₹3,530₹1,942 inclusive of GST Save 45% | |
| CU.TA.HA.00355 | 142003A | 14 mm | Metric | High Speed Steel | Was ₹5,150₹2,833 inclusive of GST Save 45% | |
| CU.TA.HA.00356 | 162003A | 16 mm | Metric | High Speed Steel | Was ₹5,150₹2,833 inclusive of GST Save 45% | |
| CU.TA.HA.00357 | 182503A | 18 mm | Metric | High Speed Steel | Was ₹7,800₹4,290 inclusive of GST Save 45% | |
| CU.TA.HA.00358 | 202503A | 20 mm | Metric | High Speed Steel | Was ₹9,950₹5,473 inclusive of GST Save 45% | |
| CU.TA.HA.00359 | 222503A | 22 mm | Metric | High Speed Steel | Was ₹10,700₹5,885 inclusive of GST Save 45% | |
| CU.TA.HA.00360 | 243003A | 24 mm | Metric | High Speed Steel | Was ₹11,900₹6,545 inclusive of GST Save 45% | |
| CU.TA.HA.00361 | 273003A | 27 mm | Metric | High Speed Steel | Was ₹18,000₹9,900 inclusive of GST Save 45% | |
| CU.TA.HA.00362 | 303503A | 30 mm | Metric | High Speed Steel | Was ₹20,100₹11,055 inclusive of GST Save 45% | |
| CU.TA.HA.00363 | 333503A | 33 mm | Metric | High Speed Steel | Was ₹24,500₹13,475 inclusive of GST Save 45% | |
| CU.TA.HA.00364 | 364003A | 36 mm | Metric | High Speed Steel | Was ₹34,200₹18,810 inclusive of GST Save 45% |
Miranda Standard Thread HSS Hand Tap M12 - M52
Hand Tap are straight flute general purpose taps which can be used for both machine or hand tapping. They are generally the most economical tool for use on production runs, but are best on materials that produce chips, or where the swarf breaks readily. Where deep holes are to be tapped, in materials which produce stringy swarf, other types of taps may be needed, especially for coarse threads.