Metravi 0 - 1000 PPM Carbon Monoxide Meter With Record Mode, Backlit LCD, LED & Beeper Alarm, CO-10

CO-09 detects the presence of carbon monoxide (CO) and measures concentrations between 1-1000 parts per million (PPM). The Meter indicates the presence of CO by a reading on the LCD and a beeper tone. The beeper function much like clicking of a Geiger counter: Above 200 PPM, the beeper sounds continuously with the concentration of CO. From 35 PPM to 200 PPM, the beeper sounds discontinuously with the concentration of CO.
Detects Presence of Carbon Mono-Oxide. Range 0 to 1000PPM with record mode, backlit LCD, LED & beeper alarm.

The Meter Indicates The Presence Of Carbon Monoxide In Two Ways: 

• By a reading on the LCD in PPM.
• By a beeper tone.

 

Features:

• Temperature Operating : 0°C to +50°C
• Storage : -30°C to +60°C
• Operating humidity : 0-99% Relative humidity (non-condensing)
• Measurement range : 0 to 1000PPM
• Measurement Resolution : 1 PPM
• Accuracy : +5% or + 10 PPM
• Warm up period : <2 seconds
• Battery : 9V, NEDA 1604A or IEC 6LR61, or equivalent.
• Auto power off : Meter automatically shuts down after 15 minutes of inactivity
• Sensor type : Stabilized electrochemical Gas-specific (CO)
• Typical sensor life : 3 years
• Maximum data mode : In this mode, LCD displays the max. data of this measurement.
• Recall data mode : In this mode, LCD displays the stored data. Press SEL button can recall next stored data
• Recall alarm mode : Press MODE button again to enter this mode, the LCD displays the alarm data---30ppm. When the measuring data is more than 30ppm and less than 200ppm, the meter will warn with discontinuity beeper; when the measuring datum is over 200ppm, the unit will warn with continuity beeper. In both cases, the alarm light glows with red light.
• Measuring time mode : Entering this mode, you can read the measuring time on the LCD.
• Above 200 PPM, the beeper sounds continuously with the concentration of CO.

 

Common Sources Of Potentially Dangerous Levels Of CO Are:

• Poorly maintained furnaces, gas heaters, or fireplaces.
• Dirty or plugged chimneys, or flue exhausts.
• Poorly maintained gas, oil, or kerosene appliances.
• Internal combustion engines (e.g., automobiles, lawnmowers, blowers).

 

Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision. M.R.P Prices and specifications are subject to change without notice.