Yato 131 Pcs Thread Repair Set, YT-1763

Professional set for repairing M5-M12 threads.

Intended use / Application

Professional set for repairing M5-M12 threads. The drill bits and taps are made of HSS 4341 high-speed steel. Single-stage taps cut the thread into which a spiral insert made of hard stainless steel is inserted. A guide knob and a punch are used to insert the insert, which breaks the protruding tip of the insert.

The set is designed for 5 types of threads:

M5 x 0.8 x 6.7 mm,
M6 x 1.0 x 10.8 mm,
M8 x 1.25 x 10.8 mm,
M10 x 1.5 x 13.5 mm,
M12 x 1.75 x 16.3 mm.

How to use

• Determine the size of the damaged thread, and then select the repair kit of the same size.
• Drill out the damaged thread with the drill bit provided.
• Then thread it using the tap provided in the kit. 
• The tap should be placed in the handwheel intended for taps.
• The knob is not included in the kit.
• Place the insert on the knob for spiral inserts so that the transverse part of the insert is in the slot in the knob. 
• Then secure the insert with a ring so that it does not stretch
• When screwed in. Secure the ring with a screw.
• Screw the insert completely into the pre-threaded hole. 
• Pull out the knob. Use a pin to break off the transverse part of the insert.
• Screw the screw into the repaired thread.

Contents

• Drill bits for reaming the damaged thread: 5 pcs.
• Single-stage taps for making a thread for a new insert: 5 pcs.
• Spiral inserts: 5 packs
• Knobs for screwing in spiral inserts: 5 pcs.
• Punches: 5 pcs.
• Hex key: 1 pc.
• Suitcase

Please Note that Products may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision. M.R.P Prices and specifications are subject to change without notice.