Fluke 110 6000 Counts / 600V True-RMS Digital Multimeter

Shop all Fluke

SKU: HA.AU.MU.00007

Model: Fluke110

Roll over the image to zoom in


Key Features

  • Product Type: Multimeter
  • Operating: -10 °C to + 50 °C
  • Storage: -40 °C to + 60 °C
  • Battery: 9 Volt Alkaline, IEC 6LR61
See all product information

ToolBuy Benefits

₹9,610 (Incl. of all taxes)

₹8,144 + ₹1,466 GST (18%)

MRP was MRP ₹11,977

Save 32%



3 Business Days

1

90303100

Download Product LeafletNot available
Download Fluke CatalogueNot available

Highlights

Compact true-rms meter for accurate electrical installation and troubleshooting. The Fluke 110 is a versatile multimeter for electrical measurements and troubleshooting. Trusted by residential and commercial electricians for troubleshooting and maintenance. The 110 is for professional use, where true-rms accuracy is needed.

Features:

  • True-RMS ac voltage for accurate measurements on non-linear signals
  • Resistance and continuity
  • Large white LED backlight to work in poorly lit areas
  • Min/Max/Average to record signal fluctuations
  • CAT III 600 V safety rated.


Accuracy Specifications:

Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 90 %. The accuracy specifications take the form of: ± ( [ % of Reading ] + [ Counts ] )

Safety IEC 61010-1, Pollution degree 2
IEC 61010-2-033, CAT III 600 V
Accuracy
Measurement Range Resolution Accuracy ± ([% of reading] + [counts])
DC millivolts 600.0 mV 0.1 mV 0.5 % + 2
DC volts 6.000 V
60.00 V
600.0 V
0.001 V
0.01 V
0.1 V
0.5 % + 2
Accuracy
Measurement Range Resolution Accuracy ± ([% of reading] + [counts])
AC millivolts1 true-rms 600.0 mV 0.1 mV 1.0 % + 3 (dc, 45 Hz to 500 Hz)
2.0 % + 3 (500 Hz to 1 kHz)
AC volts1 true-rms 6.000 V
60.00 V
600.0 V
0.001 V
0.01 V
0.1 V
1.0 % + 3 (dc, 45 Hz to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz)
Continuity 600 Ω 1 Ω Beeper on < 20 Ω, off> 250 Ω; detects opens or shorts of 500 μs or longer.
Ohms 600.0 Ω 0.1 Ω 0.9 % + 2
6.000 kΩ
60.00 kΩ
600.0 kΩ
6.000 MΩ
0.001 kΩ
0.01 kΩ
0.1 kΩ
0.001 MΩ
0.9 % + 1
40.00 MΩ 0.01 MΩ 5 % + 2

All ac voltage ranges are specified from 1 % to 100% of range. Because inputs below 1 % of range are not specified, it is normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together. For volts, crest factor of ≤ 3 at 4000 counts, decreasing linearly to 1.5 at full scale. AC volts is ac-coupled.

Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision. M.R.P Prices and specifications are subject to change without notice.

Specifications

Technical specifications for Fluke 110 6000 Counts / 600V True-RMS Digital Multimeter
Maximum voltage (between any terminal and earth ground)600 V
DisplayDigital: 6000 counts updates 4/sec
Bar graph33 segments, updates 32/sec
Operating-10 °C to + 50 °C
Storage-40 °C to + 60 °C
Battery9 Volt Alkaline, IEC 6LR61
Battery life400 hours typical, without backlight

Shop By Related Categories