Kusam-Meco 3-5/6 Digits 6000 Counts LCD Display True RMS Digital Fork Clampmeter, KM 039F

• Fork-clamp Current measurement
• 12mm Slim-Probe open jaws for easy slide into tight wirings.
• Cx range 200.0µF to 2500µF for start & run motor capacitors.
• MAX/MIN Recording Mode.
• 5ms Crest (Peak-Hold) Mode.

Features & Benefits:

• Backlight Display
• Non-Contact EF-Detection (NCV) with Hi/Lo Selectable Sensitivities
• Probe-contact EF-Detection (Single-pole) for precise indication of live
• Auto-ranging for all ranges
• Relative Mode / Data Hold
• BeepLit feature for Diode & Continuity
• Intelligent Auto-Power off
• Relative Humidity - Maximum relative humidity is 80% for temperatures up to 31 °C decreasing linearly to 50% relative humidity at 40 °C
• Temperature Coefficient - nominal 0.1x (specified accuracy) / °C @ (0 °C ~ 18 °C or 28 °C ~ 40 °C), or otherwise specified
• Low Battery Indication - Below Approx. 2.85V for Capacitance & Hz; Below Approx. 2.5V for other functions

Safety:

• Certified per IEC/EN/CSA_C22.2_No./ULstandards: 61010-1 Ed. 3.0, 61010-2-032 Ed. 3.0, 61010-2-033 Ed. 1.0, & 61010-031 Ed. 2.0 to Measurement Categories CAT III 600V and CAT IV 300V ac & dc.
• Overload Protection: Current via Fork-Clamp: 200A AC rms at <400Hz / Voltage via terminals: 66V DC / 920V AC rms. / Other functions via terminals: 600V DC / VAC rms
• E.M.C.: Meets EN61326-1:2013 ACA functions, in an RF field of 1V/m: Total Accuracy = Specified Accuracy + 40 digits at around 87MHz; DCmA and Ohm Functions, in an RF field of 1V/m: Total Accuracy = Specified Accuracy + 25 digits; Other Functions, in an RF field of 3V/m: Total Accuracy = Specified Accuracy + 20 digits

Package Content:

• Test leads set
• Battery
• User Manual
• Bkp60 banana-plug type-k thermocouple & carrying case

Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision. M.R.P Prices and specifications are subject to change without notice.