Metravi 6000 Counts / 56 mm Digital Clamp On Power Meter, 307

6000 Counts, Backlit LCD, Single Phase and Three Phase, Non Contact Voltage Detector, Data Hold, Peak Hold, Relative, Max/Min Reocrd, Single Phase KW, KVA, KVAr, PF, KWh and KW & PF for Three Phase. Clamp Jaw Size 56mm. AC Current up to1500A AC.

• METRAVI Digital Clamp On Power Meter Model 307 is a high technology product and has been produced under strict quality control.
• The meter has been designed and tested according to EN 61010-1 2000 version to grant the user the utmost safety conditions thanks to CPU (beep sound to alter with the overload voltage) and the assuring double insulation and over voltage category III 600V protection.
• Model 307, 30 Digital Power Clamp Meter is a handheld meter that is designed for use in the field, electricity power department. The meter is powered by 1.5VAAA×3 battery and has over-moulded technology housing

The Meter Can Perform The Following Measurements:

• AC voltage measurement (VAC).
• AC current measurement
• Active Power measurement. (kW)
• Reactive Power measurement. (KVAr)
• Apparent Power measurement. (kVA)
• Energy measurement.
• Power factor measurement (PF).
• Frequency measurement.
• Phase sequence measurement For Three Phase measurements - Active Power and Power Factor.
• Each of these functions can be selected by means of a 6 positions rotary switch. The quantity selected is displayed with indication of measuring unit and active functions.
• The meter comes with auto-power-off function, 15 minutes after no change of the last selection function or rotary switch position, to extend the battery life span. Buzzer alert with one short single following by consecutive 6 secs. before the power comes off. Auto Power Off function can be disabled.

Features:

• T-RMS AC Clamp On Power Clamp
• Auto Power Off
• Live Wire Detection
• Min / Max and Average Recording Facility
• Phase Sequence Indication
• Data Hold, Peak Hold & Relative Measuring Facility
• Electronic Overload Protection
• Measures KW, KVA, KVAr, PF, Energy for Single Phase Loads
• Can be used to measure in single phase, two phase and three phase loads.
• Clamp Jaw Size : 56mm
• Complies with CE safety CAT III Over voltage 600V according to EN 61010-1 (2000 version).

What's Included In This Package:

• Power Clamp Meter
• Pair Of Test leads
• Instruction Manual
• 1.5V x3 Battery
• Red, Black & Yellow Tie Lines

Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision.